Core Shredders
CONVENIENTLY LOCATED WHERE SCRAP ACCUMULATES, SHREDS CORES, AND TRANPORTS TO THE BALER.
This system removes cores faster, and more efficiently, integrates into the air system and can be installed in series with your existing sheet shredder. It helps you save on shipping and transportation costs, reduces storage space, and makes it possible for you to recycle cores and turn them into a profit center.
| Category | Description | Notes |
|---|---|---|
| Core OD size | 7-1/2″ OD, Max | (1): ½” Wall Thickness, Max |
| Output material size 1/2″ Wide Core Strips (typical) | 1/2″ Wide Core Strips (typical) | |
| Throughput capacity Notes(2) | 150 ft / min | (1): Throughput capacity can be adversely impacted by inadequate air flow in air system(2): Short time gaps (2-4 seconds) between cores are recommended |
| Mounting | Configurable — Floor mounted — Platform mounted | |
| Material Infeed | Configurable — Manual infeed — Inline w/ processing discharge conveyor | |
| Material Discharge | Configurable — Gravity dump / feed — Duct transition to plant air handling system | |
| Machine controls | Configurable — Stand-alone. Machine delivered with control panel — Slave. Electrical devices terminated at junction box. Machine controls furnished by others | |
| Safety interlocks | Included — Emergency stop button — Solenoid locking switch (cutter head hood) | |
| Service drop (recommended) | 480V, 50 Amps or 240V, 100 Amps | |
| Motor (1), Radial cutter head | 480V, 35 Amps or 240V, 80 Amps | |
| Motor (2), Upper roller console | 480V, 7.5 Amps or 240V, 15 Amps | |
| Motor (3), Lower roller console | 480V, 7.5 Amps or 240V, 15 Amps | |
| Shredder Clear Height | 60 inches | |
| Shredder Clear Width Notes(1) | 54 inches | (1): A minimum safe distance of (3) ft is recommended for access to the machines control panel. |
| Shredder Clear Length Notes(1) | 78 inches | (1): Adequate space is required for the discharge of material. The minimum pipe bend radius should be (4*d) for the transition to the vertical air run. Where ‘d’ is the diameter of the air duct. |
| Cutter Head Notes(1) | Replaceable/Refurbish-able. Machine is shipped with replacement / back-up cutting head | (1): Spare cutter head is removed and replaced from back of shredder |