TURNKEY DIAPER LINE DUST SYSTEMS
ENGINEERED, MANUFACTURED AND INSTALLED
BY AIR SYSTEMS DESIGN
MOST DIAPER LINE DUST SYSTEMS COME WITH HOODS AND A DUCT MANIFOLD TO CONNECT TO WITH SPECIFICATIONS.
Most diaper lines come with hoods and a duct manifold (as seen on a JOA or GDM line) to connect to with specifications. These specifications dictate what CFM and what static pressure is required at the point where the customer’s ductwork is attached to it. ASDI can provide the proper amount of CFM and static pressure to the machine manufacture’s manifold.
‘SOME DIAPER LINES COME WITH INADEQUATE DUST HOODS AND THIS IS WHERE ASDI CAN BE OF SERVICE.
ASDI can customize a hood or series of hoods to provide an increase in the removal of dust. ASDI will use the proper gauge ductwork and provide a turnkey installation offering several types of filters that will suit the customer. An MCC and PLC can also be provided with this system. Spark detection systems can be added and we are experienced with the NFPA guidelines on the proper methods of deflagration protection. We have used Fike and Fenwall as well as several other manufacturers in our systems in the past.
Most customers have taken the air from the filters (which has gone through a HEPA filter) and we connected the ductwork to their AHU and returned the air in the production area. In some cases the ductwork went across the roof and we had it insulated and coated. Once inside we have used galvanized ductwork to release the air or we have used a Duct Sox.
ASDI HAS ITS OWN FABRICATION FACILITY AS WELL, AS ITS OWN INSTALLATION CREWS AND HAVE BEEN DOING THESE TYPES OF TURNKEYS SINCE 1982.
Contact us today to see how we can put together and install the most efficient pneumatic conveying system with the components to meet your business’s unique needs.